The charcoal rate of sawdust briquette equipment is also an important indicator of the output of sawdust briquette equipment. The sawdust briquette machine has a high carbon yield and a high output. However, in the actual production process, there are always some factors that affect the charcoal rate of the sawdust briquette machine. Therefore, before using the sawdust briquette machine equipment, it is necessary to understand what factors will affect the charcoal rate of the sawdust briquette machine.
The charcoal rate of the sawdust briquette machine shows a certain difference due to the different types of raw materials. Although the lower carbonization temperature can obtain a higher carbon removal rate, the produced charcoal has low quality and corrosiveness and contains acidic tar substances, so it cannot be burned as a clean smokeless flame.
The high-quality commercial carbon should have a solid carbon content of more than 80%, which requires the final carbonization temperature to be controlled above 500 °C. The wood fiber content of the raw material has a positive impact on the yield of charcoal.
Sawdust briquette equipment produces more mature materials that are more structurally sturdy. As the carbonization temperature increases, the friability of charcoal will also increase. In actual production, it is found that when the final carbonization temperature is between 550 ° C and 650 ° C, the friability of charcoal and the solid carbon content can be Achieve a better balance.
The sawdust briquette machine is mainly used to produce charcoal equipment. The machine can use the waste material to produce charcoal, which not only solves the problem of reuse of waste materials, but also alleviates the high demand for charcoal in the market. In the actual use of the sawdust briquette machine, some of the results are low because of the carbonization of the rod.
The sawdust produced by the sawdust briquette machine has a low yield, and there are several problems caused by this problem:
a. Improper ignition position: the ignition position is too close to the oxygen supply hole, and an open flame is generated at the oxygen supply hole (kiln door), thereby causing the kiln The phenomenon of a large amount of charcoal at the door. Solving this problem is mainly to correct the ignition position so that the ignition position is close to the middle of the kiln.
b. The warming process is too long: sometimes it may be because the charcoal personnel neglected the closing time of the kiln, which caused the heating time to be too long and wasted some charcoal that had been charred.
c. The kiln flue is not accessible: the flue will not lead to the extension of the carbonization time, so that some charcoal will be burned more, so the chimney and the flue must be ensured when the kiln is installed.
d, kiln gas leakage: kiln gas leakage needs timely repair.
e. Too much oxygen in the carbonization process: This problem is more complicated. The charcoal personnel must constantly observe the kiln temperature and adjust the oxygen supply.
Hydraulic&Mechanical Hookah Charcoal Briquetting Machine
Hookah charcoal briquetting machine uses high pressure to press charcoal powder into different shapes of charcoal briquettes. This article shows materials, product application, principle, specification and so on to take you to understand the three types of machines.
Drum Rotary Dryer For Sawdust Powder Drying
Rotary dryers provide a reliable solution for the wood processing industry by quickly converting wet sawdust or wood chips into dry raw material through drum drying.
Sawdust Briquette Machine | Biomass Briquette Press Machine
Sawdust briquette machine converts wood chips etc. into hollow bar solid fuel under high temperature and pressure. This article provides you with detailed information to experience efficient production and superior quality.
Comprehensive Crusher | Multi-functional Crushing Equipment
Large comprehensive crushers are generally used to process a wide range of various large sized stray timber and more. This article describes how its superior performance and comprehensive applicability make it ideal for wood processing.
Wood Peeling Machine | Wood Log Debarker
Wood peeling machine is a professional equipment for removing the skin layer on the surface of wood, which is widely used in the fields of wood processing and pulp paper making.
Charcoal briquette drying machine | shisha& BBQ charcoal dryer machine
protection, energy-saving, safety, and intelligent control. Charcoal dryers have gained popularity in Iran, South Africa, Nigeria, the Philippines, and other countries as they create huge profits for charcoal producers.