The gas produced by the biomass gas stove belongs to the green new energy and has strong vitality. The amount of solid biomass available in most rural areas is huge, mainly agricultural waste and wood waste. The distribution of biomass is scattered, it is difficult to collect and transport, and it is difficult to adopt large-scale combustion technology, so small and medium-scale biomass gasification power generation technology has unique advantages.
What should I do about the wear of the propeller of the charcoal machine? To solve this problem is actually very simple. First of all, the raw materials must be ensured to be dry, so that the wear of the propeller is relatively small, and the particle size and impurity content of the saw have an impact on the degree of wear, and the size of the motor is too small. Since the power is not small enough, the horse-drawn cart will also cause the acceleration of the thruster wear. It is better to choose high-carbon steel wear-resistant electrode when welding the thruster.
Original charcoal making machine mainly using wood chips as raw materials. The main work process is that the wood chips are formed by high temperature and high pressure on the machine and then sent to the carbonization furnace to carbonization.
The method of making charcoal was very simple in the past.It is mainly to cut the trees into sections, and then ignite it in the charcoal kiln, after burning to a certain extent, close the charcoal kiln to prevent air from entering.
The hardness of the pulverized coal briquetting machine is an important factor to ensure that the briquettes are not broken during storage and transportation. An important criterion for judging the quality of briquettes is the hardness of the pulverized coal pressed by the pulverized coal briquetting machine.
With the development of society and economy, two significant changes have taken place in the investment of the charcoal industry: First, the development from small-scale labor-intensive to fully automatic large-scale efficiency; Second, the configuration of a complete set of charcoal machines is developed from production-oriented to environmentally friendly. The common characteristics pursued by many charcoal manufacturers are good efficiency, smoke-free environmental protection, and a high degree of automation.
Charcoal is a kind of waste renewable energy fuel. It has a higher calorific value than charcoal of similar raw materials. It is smokeless, tasteless, non-toxic, clean and hygienic. It can be widely used for heating at home. It is an essential raw material for carbon disulfide plants, mosquito coil plants, explosives plants, copper processing plants, and foundries.
The sawdust briquette charcoal is a kind of high-energy clean fuel, the quality is better than traditional fired charcoal. The quality of the briquette charcoal made from different raw materials is significantly different. Raw materials rich in lignin and high in cellulose mixed in a certain proportion can produce high-quality briquette charcoal.
Step 2: rotary dryer for wood drying – the drying effect is in line with the standard of rapid drying The ideal drying effect for raw materials is moisture content of the sawdust maintained between 6% and 12%. To reach the premise condition of charcoal of good quality, rotary dryer is adopted to complete dry…
End of content
End of content