Usually combined with crushing operation of materials. The wet material is fed into the feeding drum from the feeding trough through an adjustable quantity feeder, and the feeding drum is rotated to the lower part of the vertical pipe. Air is fed into the preheater by a blower and heated to 80-90 C and then blown into a vertical tube. The velocity in the tube is determined by the size and density of the wet particles, usually 10-20 m/s. The dried particles are carried by intense air flow to the buffer (closed at the upper end) and then fall into the cyclone separator along the landing tube. The dry material is discharged and discharged through the unloading cylinder. Exhaust gas is discharged through the upper end of the exhaust pipe through the bag filter.
The main advantages are:
(1) the hot air is directly contacted with the dried material, and the drying speed is fast and the intensity is high.
(2) the drying time is only 5-7 seconds.
(3) the structure is simple and the floor space is small.
(4) suitable for mass production. The drawback is that more energy is consumed.
Widely used in industry. According to the type of equipment, it can be divided into straight tube air dryer, cyclone air dryer, pulse air dryer and so on.
Airflow dryer working principle
The wet material enters the drying pipe from the screw feeder, and the air is blown in by the blower. After heated by the heater, the wet material is combined with the material to achieve the purpose of drying in the drying pipe. The dried materials are recycled in cyclone dust collector and bag filter.
Airflow dryer use characteristics
Advantages: high drying strength, very short drying time, high thermal efficiency, simple equipment, and great capacity for processing, product quality uniform and reliable.
Application scope
The moisture content of wet material treated is between 10~40%.
Biomass gasifier | Biomass syngas power plant
Biomass gasification is the use of low-calorie biomass energy sources, which undergo a redox reaction under certain reaction conditions, and then produce flammable gases such as hydrogen and carbon monoxide. The gas produced by this reaction can be used either directly to provide thermal energy or to produce electricity.
Shisha&Hookah charcoal production line
Our company has recently launched a new set of fully automatic hookah charcoal production line, which can meet the needs of customers for high-efficiency and high-quality production of hookah charcoal. The produced hookah charcoal has the advantages of being hard and non-divergent, high density, easy to ignite, long burning time, uniform heating, etc.
Wood Pallet Blocks Production Line | Sawdust Pallet Block Plant
Wood pallet blocks production line processes waste wood into block matting, which is widely used in wood pallet feet and other fields. This article demonstrates the high efficiency and energy saving of this line, which provides a solution for the reuse of wood resources.
Wood Peeling Machine | Wood Log Debarker
Wood peeling machine is a professional equipment for removing the skin layer on the surface of wood, which is widely used in the fields of wood processing and pulp paper making.
Honeycomb Coal Machine | Coal Briquette-making Machine
Honeycomb coal machine crushes and mixes the processed coal powder and compresses it into briquettes. This article enables you to know more about the machine by showing videos, specifications, moulds, uses, principles and so on.
Honeycomb Coal Briquette Production Line | Charcoal Forming Machine
The honeycomb coal briquette production line crushes, mixes, shapes and carbonises raw materials such as wood or straw, and finally produces highly efficient and environmentally friendly honeycomb coal products to meet a wide range of energy needs.