As one of the factors affecting the cost of charcoal production, the consumption of electricity has to be mentioned, but some manufacturers, in order to give customers the concept of making money by investing in charcoal, say that the electricity consumption is very low, in order to attract consumers. So how much electricity will be needed to produce 1 tons of charcoal?
First of all, we need to know what equipment the charcoal plant needs to consume electricity. Through the process of mechanical charcoal production, we know that the branches, lumber and other raw materials must be crushed first, then dried through the dryer equipment, and then made into fuelsticks through the rod-making machine, and finally put into the carbonization furnace for carbonization to produce mechanical charcoal. That is to say, the main power-consuming equipment is crusher, dryer, rod making machine, carbonization furnace four kinds of equipment, but according to the specific needs of customers, it is not the same. However, here we calculate the complete set of charcoal equipment with the most commonly used Nissan 1 tons.
The daily output of 1 tons of charcoal equipment, we configure the mill power is 7.5 kw, dryer power is 4 kw, bar power is 15 kw, carbonization furnace power is 1.5 kw, the total power is 28 kw. The time for charring a ton of machine-made charcoal is 20 hours, that is, basically one ton of machine-made charcoal per day. However, the four units that produce one ton of charcoal are not always in production. For example, a mill can crush 600 to 800 kg of raw materials in an hour, and produce three tons of particulate materials (usually three tons of raw materials to produce one ton of charcoal) in almost four hours. Generally speaking, the production of one ton of mechanical charcoal, almost 300 kWh of electricity, and then according to the electricity tariff standards of each region to calculate, and finally get the corresponding electricity tariff.
Above, we only calculate the electricity cost of producing 1 ton machine charcoal according to the usual situation, but some customers use different raw materials, the configuration of machine charcoal equipment is also different, so it is only a reference to us, if customers want to know some specific details. Saving information can be contacted with Shuliy machinery at any time.
Wood Pellet Mill Machine | Biomass Pellet Making Machine
Wood pellet mill machine processes wood and other raw materials into high-density, high-fuel-value wood pellets, which can be widely used in the field of biomass energy.
BBQ Charcoal Production Line | Coal Ball Press Machine
BBQ charcoal production line is used to efficiently compress coal powder or wood chips, etc. into balls with uniform specifications and high density, aiming to improve efficiency and ensure the manufacture of high quality BBQ charcoal products.
Wood Hammer Mill Crusher | Large-yield Hammer Grinder
This wood hammer mill crusher ensures excellent pulverising results by quickly and finely grinding raw materials into uniform particles through a powerful hammer vane system.
Wood Pallet Blocks Production Line | Sawdust Pallet Block Plant
Wood pallet blocks production line processes waste wood into block matting, which is widely used in wood pallet feet and other fields. This article demonstrates the high efficiency and energy saving of this line, which provides a solution for the reuse of wood resources.
Charcoal-making production line
The charcoal-making production line is a production line to produce long coal rods, which mainly produces charcoal through the steps of carbonizing raw materials, crushing, forming, and drying. And the appearance of the produced charcoal rods can be customized to realize the diversification of coal production. The charcoal-making production line is currently popular in countries such as Chile, Oman, Vietnam, and Nigeria.
Carbonization Furnace For Making Charcoal Briquettes
The hoist carbonization furnace is a special equipment for charring wood raw materials. It is unique in that it is designed for easy lifting and moving, making it more flexible and convenient to operate in different locations.