First:
The raw materials of the users of the charcoal briquette production line need to be pulverized into granulated articles of less than 1 cm by a pulverizer such as a straw pulverizer or a wood pulverizer so that the rod can be better.
Second:
the raw materials after pulverization are dried, and the moisture after drying is 8%-12%.
Three:
The raw materials after drying are processed by the rod machine-made. The step of making the rod is very important. Only the first two steps lay a solid foundation, and the rod making operation will proceed smoothly because the rod making machine is in the form of high temperature and high pressure. The pulverized raw material is extruded into a rod-shaped article. The rod making machine is also divided into 80 rod making machines, energy saving rod making machines, etc., and is selected according to different requirements of users.
Four:
Why is the carbonization step also very important? If it is said that the machine-made of carbonization equipment – carbonization furnace – is very well controlled, because the furnace is equipped with temperature control instruments, if it is artificially used in the case of carbonization of earth kiln It is necessary to have a very understanding of the charcoal technology of the teacher to be able to charcoal a better machine-made charcoal. Therefore, rod making and carbonization are very important links.
The charcoal briquette production line has many advantages in production. The main reason is that it can achieve smoke-free environmental protection in production, and the machine-made charcoal produced is also smoke-free environmentally friendly charcoal. At the same time, it effectively utilizes agricultural and forestry waste and solves the forest. The problem of resource scarcity is in the process of producing charcoal in the charcoal machine production line. Users need to pay more attention to the rod and carbonization links. These two links can affect the quality of the machine-made charcoal, so it is not sloppy in these two links.
Wood Hammer Mill Crusher | Large-yield Hammer Grinder
This wood hammer mill crusher ensures excellent pulverising results by quickly and finely grinding raw materials into uniform particles through a powerful hammer vane system.
Continuous Airflow Drying Machine
The airflow dryer is mainly used to dry wood chips with a size of less than 5mm and reduce the moisture to 8-12% through the airflow pipe. The wood chip can be processed in the next step. The principle is that the hot gas is circulated through the pipe by burning the combustible material through the airflow, which is the raw material and the hot gas fully contact, thereby achieving the effect of the wood chip drying.
Continuous carbonizing furnace for charcoal making
The continuous carbonization furnace can make wooden materials like wood sawdust or peanut shell into charcoal. This equipment can continuously carbonize for 24 hours, realizing simultaneous feeding and discharging. It is the ideal equipment for the mass production of charcoal.
Sawdust Briquette Machine | Biomass Briquette Press Machine
Sawdust briquette machine converts wood chips etc. into hollow bar solid fuel under high temperature and pressure. This article provides you with detailed information to experience efficient production and superior quality.
Charcoal Briquette Making Machine | Charcoal Briquette Extruder
The charcoal briquette machine can make all kinds of coal powder into different shapes of coal rods. This article lets you understand the machine more intuitively by showing the parameters, finished products and videos of the machine.
Charcoal briquette drying machine | shisha& BBQ charcoal dryer machine
protection, energy-saving, safety, and intelligent control. Charcoal dryers have gained popularity in Iran, South Africa, Nigeria, the Philippines, and other countries as they create huge profits for charcoal producers.