The charcoal machine has become a symbol of the times, symbolizing the development of science and technology and taking a big step forward. The use of charcoal machines is becoming more and more common. Many traditional charcoal manufacturers have switched to energy-saving and environmentally friendly charcoal machines to produce charcoal, but most operators are unable to maintain the machine in time, resulting in a service life that is far below the standard. The use time, then how to judge whether the machine needs maintenance? To judge whether the machine needs maintenance or not, it is necessary to judge according to the operation condition of the machine.
When the following conditions occur, maintenance is required:
1. The charcoal mechanism rod system has a greatly reduced sticking speed, the efficiency is obviously reduced, and the quality of the rod is reduced, and the carbon rod is loosely slag, which is caused by the reduced working efficiency of the internal pressing system of the rod system for a long time. The rod system should be cleaned and added with lubricating oil to improve the lubrication of the hydraulic shaft.
2. The dryness of the raw materials does not meet the standard requirements, which causes the sawdust briquette machine to often get stuck. This situation indicates that the charcoal machine needs maintenance, mainly because the temperature of the dryer does not reach the specified temperature, resulting in insufficient raw materials. Drying, directly into the sawdust briquette machine, the wet material is stuck in the rod system, causing the sawdust briquette machine to jam.
3. The sawing rods of the sawdust block mechanism are separated from each other and cannot be evenly connected together. This situation indicates that the hydraulic system of the charcoal machine needs to be repaired and maintained, and the pressure of the hydraulic system is insufficient, resulting in the charcoal structure not being Steady, there is a phenomenon of detachment when the stick is released.
The maintenance of the charcoal machine can effectively improve the production efficiency of the machine, and can greatly extend the service life of the machine. At the same time, the method of mastering whether the machine needs maintenance or not requires the operator to have certain practical experience, and obtain it according to the usual production. The experience to determine whether the machine needs to be repaired.
Charcoal Carbonization Furnace | Biomass Charcoal Making Machine
This type of charcoal carbonization furnace offers greater carbonisation capabilities, a wider range of materials, continuous production and higher productivity.
Charcoal powder grinding machine | wheel grinder mixer
This industrial charcoal powder grinding machine also named the wheel grinder mixer, is specially designed for crushing charcoal pieces into fine charcoal powder. This wheel charcoal grinder mainly can grind charcoal powder and even mix them with the binder, water, etc. Then the processed charcoal powder can be used for further briquetting to make BBQ charcoal or shisha charcoal.
Coal Ball Briquette Machine | BBQ Coal Press Machine
Coal ball briquette machine presses charcoal chips, charcoal powder and so on into even and tight barbecue charcoal balls. This article makes you understand the machine more clearly by introducing the working principle, mould, structure, application, working video and so on.
Shisha Charcoal Packing Machine | Hookah Briquettes Bagging Machine
The shisha charcoal packing machine provides excellent appearance and freshness for hookah charcoal products through its unique and sophisticated pillow packaging method, while improving production efficiency.
Comprehensive Crusher | Multi-functional Crushing Equipment
Large comprehensive crushers are generally used to process a wide range of various large sized stray timber and more. This article describes how its superior performance and comprehensive applicability make it ideal for wood processing.
High Capacity Drum Wood Chipper For Sale
Drum wood chipper is widely used in woodworking processing field by rotating knives to thin wood chips efficiently. This article takes you to understand the efficient performance in detail by showing its structure, function, parameters and video.