For customer from South Africa did not quite understand where the heat source of the continuous carbonized came from, the workers in our factory gave him a detailed answer, and here we will share this answer with you in detail.
The heat source of the continuous carbonized comes from the gasifier, which is equipped with the gasifier device.
1. Before the continuous carbonization machine starts, the heating furnace shall be initiated by a heat source.
(1)One method is to use the hot gas flow generated by the reflector to innate the combustion furnace, so as to achieve the goal of heating. the combustion furnace, so as to achieve the goal of heating.
(2)The other is to use the gasifier device to ignite the sawdust through the gasifier. The combustible gas produced by gasifier will be burned to heat up the charcoal furnace. (the gasified sawdust passes through the carbonization furnace becomes carbonized carbon powder, and the combustible gas is recycled through the wood tar recovery device.)
2. When the coking furnace is heated to a certain temperature, the combustible gas generated in it is separated by the dust separator. The combustible gas after the dust separation is recovered by the wood tar recovery device (generally, 200kg-300kg of wood tar can be obtained for each ton of carbon powder).
3. After the carbonization furnace heats and gas is produced, the reflector heating or gasifier gas producing device stops working at the same time, and the preliminary heating is finished.
4. After about 2-3 hours of operation (according to different temperature), the carbon powder flows into the condenser and flows out of the condenser. If the equipment is running well, and the material can be continuously discharged. Therefore, this carbonization furnace is called continuous carbonization furnace.
Charcoal powder grinding machine | wheel grinder mixer
This industrial charcoal powder grinding machine also named the wheel grinder mixer, is specially designed for crushing charcoal pieces into fine charcoal powder. This wheel charcoal grinder mainly can grind charcoal powder and even mix them with the binder, water, etc. Then the processed charcoal powder can be used for further briquetting to make BBQ charcoal or shisha charcoal.
Charcoal briquette drying machine | shisha& BBQ charcoal dryer machine
protection, energy-saving, safety, and intelligent control. Charcoal dryers have gained popularity in Iran, South Africa, Nigeria, the Philippines, and other countries as they create huge profits for charcoal producers.
Wood Peeling Machine | Wood Log Debarker
Wood peeling machine is a professional equipment for removing the skin layer on the surface of wood, which is widely used in the fields of wood processing and pulp paper making.
Belt Type Continuous Charcoal Dryer Machine For BBQ Industry
This continuous charcoal dryer adopts advanced mesh belt heat transfer technology, which realises continuous and even hot air transfer and ensures that the charcoal gets the best effect during the whole drying process.
Wood Hammer Mill Crusher | Large-yield Hammer Grinder
This wood hammer mill crusher ensures excellent pulverising results by quickly and finely grinding raw materials into uniform particles through a powerful hammer vane system.
Biomass gasifier | Biomass syngas power plant
Biomass gasification is the use of low-calorie biomass energy sources, which undergo a redox reaction under certain reaction conditions, and then produce flammable gases such as hydrogen and carbon monoxide. The gas produced by this reaction can be used either directly to provide thermal energy or to produce electricity.