1, first of all, sawdust briquette machine is the key link, the quality of molding directly determines the qualification of finished products. Propeller is the key vulnerable part of sawdust briquette machine. Propeller is the vulnerable part. The friction produced by the contact between the top part of the propeller and the raw material in the process of high-speed rotation makes the end face of the propeller worn seriously.
When the end face angle becomes small or the contact surface becomes rough and speckled, the rod produced cannot meet the requirements of the sawdust briquette machine, or even not. At this point, the propeller should be repaired according to the method taught by the manufacturer’s technicians to meet the technical requirements. As long as the operator (or maintenance personnel) often practices and grope, it is easy to master.
2. The humidity of raw materials and the humidity of raw materials have a direct impact on the molding effect, so the raw materials must be dried before making the bar, drying to a certain range, generally, 8% – 12% can be, the choice of the dryer is also very important.
3. The temperature of the forming tube of the sawdust briquette machine is generally controlled at 260 degrees centigrade 1 320 C. Temperature is mainly determined by raw materials. Generally speaking, the temperature of bamboo and wood raw materials is relatively low. It is appropriate to control the temperature between 260 and 280, the sawdust of hard and miscellaneous wood between 280 and 300, and the straw and rice husk can be selected from 300 to 320. Of course, the selection of the degree of raw materials to take into account the actual moisture content, with the same raw material, the temperature is also different, mainly by the operator flexible grasp. In addition, the color of the outer surface of the rod should not be too dark.
Belt Type Continuous Charcoal Dryer Machine For BBQ Industry
This continuous charcoal dryer adopts advanced mesh belt heat transfer technology, which realises continuous and even hot air transfer and ensures that the charcoal gets the best effect during the whole drying process.
Continuous Airflow Drying Machine
The airflow dryer is mainly used to dry wood chips with a size of less than 5mm and reduce the moisture to 8-12% through the airflow pipe. The wood chip can be processed in the next step. The principle is that the hot gas is circulated through the pipe by burning the combustible material through the airflow, which is the raw material and the hot gas fully contact, thereby achieving the effect of the wood chip drying.
BBQ Charcoal Production Line | Coal Ball Press Machine
BBQ charcoal production line is used to efficiently compress coal powder or wood chips, etc. into balls with uniform specifications and high density, aiming to improve efficiency and ensure the manufacture of high quality BBQ charcoal products.
Sawdust Briquette Machine | Biomass Briquette Press Machine
Sawdust briquette machine converts wood chips etc. into hollow bar solid fuel under high temperature and pressure. This article provides you with detailed information to experience efficient production and superior quality.
Carbonization Furnace For Making Charcoal Briquettes
The hoist carbonization furnace is a special equipment for charring wood raw materials. It is unique in that it is designed for easy lifting and moving, making it more flexible and convenient to operate in different locations.
Drum Rotary Dryer For Sawdust Powder Drying
Rotary dryers provide a reliable solution for the wood processing industry by quickly converting wet sawdust or wood chips into dry raw material through drum drying.