What kind of problems do you need to carry out maintenance on the sawdust briquette machine? This issue is a problem for many investors in the charcoal machine industry. The sawdust briquette machine is the most important equipment in the charcoal machine. If there is a problem with the equipment, it will not be able to produce, and if there is no way to produce it, it will not bring good benefits to the enterprise. What problems need to be repaired by the sawdust briquette machine? It’s up to you by Shuliy Machinery.
1. In the process of using the sawdust briquette machine, how to carry out maintenance when there is smoke? In case of such a situation, it is necessary to shut down and check to see if the raw material is too humid. If the humidity is too high, it should be adjusted. The humidity of the raw material needs to be 8% to 12%. If it is not the humidity problem, It is necessary to see if the surface of the propeller is worn and there is smoke in the case of wear on the surface of the propeller. If the thruster is worn out, the thruster is repaired.
2. In the process of using a sawdust briquette machine. There is a problem of non-formation. At this time, the heating coil of the briquette machine should be inspected. Check whether the heating coil can be heated. If it cannot be heated, it is necessary to exchange the heating coil and then work.
3. When the sawdust chipping machine is in production, there is a situation of the shutdown. How to carry out maintenance, this is to see if there is a problem with the circuit. If there is a problem with the circuit, repair it in time.
Charcoal crusher | Coal crusher | Briquettes grinder
The industrial charcoal crusher was named coal crusher machine, coal briquettes grinder, etc. This commercial crusher machine is mainly used for crushing all kinds of charcoal or coal briquettes into small pieces and powder. With high efficiency for grinding charcoal and coal powder, this coal crusher is widely used in charcoal processing plants and various charcoal production lines.
High Capacity Drum Wood Chipper For Sale
Drum wood chipper is widely used in woodworking processing field by rotating knives to thin wood chips efficiently. This article takes you to understand the efficient performance in detail by showing its structure, function, parameters and video.
Charcoal-making production line
The charcoal-making production line is a production line to produce long coal rods, which mainly produces charcoal through the steps of carbonizing raw materials, crushing, forming, and drying. And the appearance of the produced charcoal rods can be customized to realize the diversification of coal production. The charcoal-making production line is currently popular in countries such as Chile, Oman, Vietnam, and Nigeria.
Continuous Airflow Drying Machine
The airflow dryer is mainly used to dry wood chips with a size of less than 5mm and reduce the moisture to 8-12% through the airflow pipe. The wood chip can be processed in the next step. The principle is that the hot gas is circulated through the pipe by burning the combustible material through the airflow, which is the raw material and the hot gas fully contact, thereby achieving the effect of the wood chip drying.
Drum Rotary Dryer For Sawdust Powder Drying
Rotary dryers provide a reliable solution for the wood processing industry by quickly converting wet sawdust or wood chips into dry raw material through drum drying.
Charcoal powder grinding machine | wheel grinder mixer
This industrial charcoal powder grinding machine also named the wheel grinder mixer, is specially designed for crushing charcoal pieces into fine charcoal powder. This wheel charcoal grinder mainly can grind charcoal powder and even mix them with the binder, water, etc. Then the processed charcoal powder can be used for further briquetting to make BBQ charcoal or shisha charcoal.