Now there is a high-quality chip pulverizer, which has a great position in the process of production. This machine is a wood chip pulverizer. So today we will learn how to use the pulverizer. What problems should we pay attention to during the use? Achieve effective operation to achieve the purpose of rationalizing work efficiency.
First
Be sure to check the operation of the equipment before using the sawdust shredder. Check whether the screws are completely installed, whether there is no jamming in each transmission part, and observe the mechanical cleanliness of the equipment. Ensure that there are no abnormal phenomena during the work, and finally adjust the speed of the work. The handling of materials and the calculation of moisture in wood materials must be reasonable and safe.
Second
The wood must check the relative dry humidity before entering the wood chip pulverizer. Pay attention to environmental conditions during transportation. If the moisture of the material is too large, it will stick to the inside of the crusher, which is easy to cause mechanical damage. Small parts are also easy to break, so pay attention to replacement after using for a period of time, the better the wear resistance, it proves that the ability of the crusher to produce is greater, and the non-wearing will directly affect the ability to produce.
Sawdust crusher
Third
After the chip pulverizer works normally, it is necessary to prevent the wood from entering the machine with metal or stones. When all the machinery and materials are inspected without any doubt, the feeding work can be carried out, and the phenomenon of jamming must be prevented when feeding. Of course, it is necessary to maintain the smoothness of the machine so that the work efficiency can be further improved. At the same time, it is also very helpful for mechanical protection and extending life.
Fourth
The mechanical valve can be conditioned to set the thickness of the wood chips, so we can set the fineness of the finished product in advance when processing, or change it according to the demand after working for a while. The longer the working efficiency of the sawdust crusher, the more the output will affect the effect of the milling. The adhesion will directly drive the looseness. Finally, the wood powder should be sieved in advance, and the excessive particle size will also affect the output value.
Continuous carbonizing furnace for charcoal making
The continuous carbonization furnace can make wooden materials like wood sawdust or peanut shell into charcoal. This equipment can continuously carbonize for 24 hours, realizing simultaneous feeding and discharging. It is the ideal equipment for the mass production of charcoal.
Carbonization Furnace For Making Charcoal Briquettes
The hoist carbonization furnace is a special equipment for charring wood raw materials. It is unique in that it is designed for easy lifting and moving, making it more flexible and convenient to operate in different locations.
Continuous Airflow Drying Machine
The airflow dryer is mainly used to dry wood chips with a size of less than 5mm and reduce the moisture to 8-12% through the airflow pipe. The wood chip can be processed in the next step. The principle is that the hot gas is circulated through the pipe by burning the combustible material through the airflow, which is the raw material and the hot gas fully contact, thereby achieving the effect of the wood chip drying.
Belt Type Continuous Charcoal Dryer Machine For BBQ Industry
This continuous charcoal dryer adopts advanced mesh belt heat transfer technology, which realises continuous and even hot air transfer and ensures that the charcoal gets the best effect during the whole drying process.
Charcoal Carbonization Furnace | Biomass Charcoal Making Machine
This type of charcoal carbonization furnace offers greater carbonisation capabilities, a wider range of materials, continuous production and higher productivity.
Drum Rotary Dryer For Sawdust Powder Drying
Rotary dryers provide a reliable solution for the wood processing industry by quickly converting wet sawdust or wood chips into dry raw material through drum drying.