The maintenance of the sawdust charcoal briquette production line is extremely important and regular work. It should be closely coordinated with the operation and maintenance of the machine. There should be full-time personnel on duty inspection.
Maintenance of sawdust charcoal briquette production line
1. Bearing: The shaft of the crusher bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required oil must be cleaned and the seal must be cleaned. Good, in the main oil filling part of the machine (1) rotating bearing (2) roll bearing (3) all gears (4) movable bearing, sliding plane.
2. The newly installed tires are prone to loosening, so it is necessary to check frequently.
3. Pay attention to whether the work of all parts of the machine is normal.
4, pay attention to check the wear level of wearable parts, always pay attention to replace the worn parts.
5. Place the bottom plane of the movable device, and the dust should be removed to prevent the movable bearing from moving on the chassis when the machine encounters unbreakable materials, resulting in serious accidents.
6, the bearing oil temperature rises, need to stop immediately for an inspection.
7. If there is impact sound when the rotating gear is running, it needs to stop the inspection immediately and eliminate it.
Installation test of sawdust charcoal briquette production line
1. The equipment should be installed on a level concrete foundation and fixed with anchor bolts.
2. When installing, pay attention to the vertical direction of the main body and the horizontal.
3. After installation, check whether the bolts in all parts are loose and the main door is tight.
4. Configure the power cord and control switch according to the power of the device.
5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.
Continuous Airflow Drying Machine
The airflow dryer is mainly used to dry wood chips with a size of less than 5mm and reduce the moisture to 8-12% through the airflow pipe. The wood chip can be processed in the next step. The principle is that the hot gas is circulated through the pipe by burning the combustible material through the airflow, which is the raw material and the hot gas fully contact, thereby achieving the effect of the wood chip drying.
Horizontal carbonization furnace | hardwood log charcoal machine
e horizontal carbonization furnace is a device that can carbonize raw materials. It is an essential machine in the process of coal production. It is widely used in charcoal processing plants because of its simple operation and high safety. There are many types of carbonization furnaces, including continuous carbonization furnaces and hoisting carbonization furnaces.
Comprehensive Crusher | Multi-functional Crushing Equipment
Large comprehensive crushers are generally used to process a wide range of various large sized stray timber and more. This article describes how its superior performance and comprehensive applicability make it ideal for wood processing.
Hydraulic&Mechanical Hookah Charcoal Briquetting Machine
Hookah charcoal briquetting machine uses high pressure to press charcoal powder into different shapes of charcoal briquettes. This article shows materials, product application, principle, specification and so on to take you to understand the three types of machines.
Honeycomb Coal Machine | Coal Briquette-making Machine
Honeycomb coal machine crushes and mixes the processed coal powder and compresses it into briquettes. This article enables you to know more about the machine by showing videos, specifications, moulds, uses, principles and so on.
Charcoal Carbonization Furnace | Biomass Charcoal Making Machine
This type of charcoal carbonization furnace offers greater carbonisation capabilities, a wider range of materials, continuous production and higher productivity.