The flue gas treatment equipment is a device that treats and recycles the soot generated when the carbonization furnace or the earth kiln is carbonized. The working principle of the flue gas treatment equipment is to pass the carbonized gas through the treatment, so that the high-temperature gas is separated and collected from the wood tar and the wood vinegar after the treatment, and then the gas and liquid are separated by the filter tower, and the filtered combustible gas is discharged, which can be done.
For the reuse of the fuel of the dryer and the carbonization furnace, it is also possible to collect the equipment that is required to be a heat source such as a boiler (it must be used under the guidance of the supplier to achieve safety conditions).
The hoisting combination structure is adopted, and the lifting and cooling method is adopted, the production cycle is greatly shortened, and the charcoal production efficiency is improved. The unique flue gas collector treatment system makes the flue gas generated by carbonization fully utilized after filtration.
In addition to meeting the energy demand of the furnace itself, the other flue gas can be used as a heat source for drying, etc., saving a large amount of fuel in production. Increased corporate efficiency. It does not need power and electricity during carbonization, and it is easy to operate. It is the ideal equipment for large-scale production of charcoal.
The flue gas treatment equipment
The flue gas treatment equipment is dedicated to the traditional kiln of the charcoal factory and the flue gas treatment during the production of the carbonization furnace.
In the process of producing charcoal, the drying equipment is filtered by the processes of dust removal, separation and condensation, and the gas generated by the carbonization equipment is filtered; Wet treatment design; when treating exhaust gas, it contains filter smoke and dust removal. Wood tar is an important raw material for refining biodiesel.
Wood vinegar is an important chemical raw material, and the price is relatively expensive; soot processing equipment makes charcoal factory The comprehensive benefits have been realized, and the added value of the products has been improved; the equipment has the advantages of energy saving, high efficiency and multi-use, and improving the economic benefits of the carbon plant.
The earthen furnace or carbonization furnace can be used to prepare a large amount of wood tar and combustible gas; it can obtain huge profits and save a lot of fuel cost for drying, and realize automatic production.
The dry distillation series carbonization furnace adopts advanced hot gas carbonization technology to greatly increase the carbonization rate (the carbonization rate is increased from 80% to 99%), and the land occupation is small, the operation is simple and convenient, the safety is good, and the production efficiency is high. Can save a lot of energy.
The equipment is equipped with a drum drying system with high yield and high output. Due to the display control function of the drying temperature, different starting temperatures can be used for different raw materials to achieve the one-time drying effect. Therefore, even water-soaked raw materials can be dried at one time, and the yield will not decrease. It laid the foundation for the normal operation of all the bar machines.
The hoisting combination structure is adopted, and the lifting and cooling method is adopted, the production cycle is greatly shortened, and the charcoal production efficiency is improved. The unique flue gas treatment system makes the flue gas generated by carbonization fully utilized after filtration.
In addition to meeting the energy demand of the furnace itself, the other flue gas can be used as a heat source for drying, etc., saving a large amount of fuel in production. Increased corporate efficiency. It does not need power and electricity during carbonization, and it is easy to operate. It is the ideal equipment for large-scale production of charcoal.
High Capacity Drum Wood Chipper For Sale
Drum wood chipper is widely used in woodworking processing field by rotating knives to thin wood chips efficiently. This article takes you to understand the efficient performance in detail by showing its structure, function, parameters and video.
Wood Pellet Mill Machine | Biomass Pellet Making Machine
Wood pellet mill machine processes wood and other raw materials into high-density, high-fuel-value wood pellets, which can be widely used in the field of biomass energy.
Belt Type Continuous Charcoal Dryer Machine For BBQ Industry
This continuous charcoal dryer adopts advanced mesh belt heat transfer technology, which realises continuous and even hot air transfer and ensures that the charcoal gets the best effect during the whole drying process.
Continuous Airflow Drying Machine
The airflow dryer is mainly used to dry wood chips with a size of less than 5mm and reduce the moisture to 8-12% through the airflow pipe. The wood chip can be processed in the next step. The principle is that the hot gas is circulated through the pipe by burning the combustible material through the airflow, which is the raw material and the hot gas fully contact, thereby achieving the effect of the wood chip drying.
Wood Hammer Mill Crusher | Large-yield Hammer Grinder
This wood hammer mill crusher ensures excellent pulverising results by quickly and finely grinding raw materials into uniform particles through a powerful hammer vane system.
Coal Ball Briquette Machine | BBQ Coal Press Machine
Coal ball briquette machine presses charcoal chips, charcoal powder and so on into even and tight barbecue charcoal balls. This article makes you understand the machine more clearly by introducing the working principle, mould, structure, application, working video and so on.