In the charcoal machine, rod making machine is a necessary equipment, which is mainly used to make materials into fuel rods, so how should we use the rod making machine to maintain?

How to maintain the bar making machine?

    1. Clean up the dust shot down on the equipment of the rod making machine, and pay attention to dust removal in the process of demolition. In the demolition inspection, dust should be forbidden to intrude into the moving parts.
    2. Open the internal cleaning inspection, and check the wear and tear of bearing, screw, triangle liner, nozzle and other components, replace bearing grease.
    3. remove the bearing cover of the roller shaft and check the wear condition of the bearing.
    4. remove the visual cover of the reducer to check the wear and the gear position of the gear.
    5. check the foundation bolts and release and tighten the safety bolts.
바 제작 기계2

The use and inspection of lubricants for bar making machines:

  1. 열린 기어 박스의 기어 오일은 기어에 60밀리미터 이상 침투해야 합니다.
  2. 롤 샤프트 베어링은 3개월마다 한 번씩 전환하여 그리스 또는 그리스 총을 교체해야 합니다.
  3. 기어 오일로 리듀서를 사용하면 60mm 기어에 주입하여 효과적인 일일 유지보수 및 관리를 할 수 있으며, 장비의 서비스 수명을 연장할 수 있습니다. 또한 주차로 인한 정지를 줄이고 장비 작업의 연속성을 효과적으로 보장할 수 있습니다.

Above is Shuliy machinery for the majority of users to analyze the selection of the use of rod machine to choose according to their own needs, while doing a good job in the maintenance of rod machine, so as to ensure that the rod machine can be smoothly made, and ensure the service life of equipment.