In the charcoal machine, rod making machine is a necessary equipment, which is mainly used to make materials into fuel rods, so how should we use the rod making machine to maintain?

How to maintain the bar making machine?

    1. Clean up the dust shot down on the equipment of the rod making machine, and pay attention to dust removal in the process of demolition. In the demolition inspection, dust should be forbidden to intrude into the moving parts.
    2. Open the internal cleaning inspection, and check the wear and tear of bearing, screw, triangle liner, nozzle and other components, replace bearing grease.
    3. remove the bearing cover of the roller shaft and check the wear condition of the bearing.
    4. remove the visual cover of the reducer to check the wear and the gear position of the gear.
    5. check the foundation bolts and release and tighten the safety bolts.
バー製造機2

The use and inspection of lubricants for bar making machines:

  1. オープンギアボックス内のギアオイルは、ギアに60ミリメートル以上浸透している必要があります。
  2. ロールシャフトのベアリングは、3ヶ月ごとにスイッチを入れてグリースまたはグリースガンを交換します。
  3. ギアオイルを使用したリデューサーは、60mmのギアに注入することで、日常的なメンテナンスを効果的に行うことができ、設備のサービス寿命を延ばすことができます。また、駐車による停止を減少させ、設備の作業の継続性を効果的に確保することができます。

Above is Shuliy machinery for the majority of users to analyze the selection of the use of rod machine to choose according to their own needs, while doing a good job in the maintenance of rod machine, so as to ensure that the rod machine can be smoothly made, and ensure the service life of equipment.