ماكينة تقطيع الأخشاب ذات السعة العالية للبيع

The drum wood chipper can cut logs, branches, boards, bamboo, cotton stalks, and other wood or non-wood fiber raw materials into uniform specification slices (20-40mm in length, 3-5mm in thickness), with a qualification rate of over 97%. It is widely used in paper mills, particle board factories, medium and high-density fiberboard factories, biomass power plants, wood chip export bases, and so on.

مميزات ماكينة تصنيع رقائق الخشب

• Strong adaptability: it can be installed and used in different geographic environments and climatic conditions without being affected by seasons.
• No foundation installation: the equipment can be put into use within 1-2 days after arrival, saving 10-15 days.
• Cost saving: no foundation construction can save users about $500-2000 in labor and material expenses (depending on the model).
• Flexible and convenient installation: no need to fix the installation site, simple debugging, improve the flexibility and mobility of the equipment.
• Adjustable discharging direction: equipped with a second discharging device, the discharging direction can be adjusted flexibly according to the needs.
• Large output: daily processing capacity of 30-300 tons, to adapt to the production needs of different users.
• Easy operation: reasonable structure design, easy operation and maintenance, suitable for all kinds of users.

Wood chipping machine main structure

The drum wood chipper consists of high high-strength steel plate welded main machine, cutting tool system, upper and lower feed rollers, conveyor belt, inlet and outlet, motor, and hydraulic system.

With sturdy structure, smooth operation and synergistic cooperation of all parts, it can efficiently complete the wood chipping operation and is suitable for a variety of working conditions.

Working principle of drum wood chipper

The drum wood chipper realizes the transformation from raw material to refined wood chips in three stages, with high efficiency and controlled energy consumption:

Hydraulic feed pressurization

• The raw material is fed through a wide conveyor belt, and the double-roller hydraulic system automatically compacts and advances the material at a uniform speed.
• Overcoming the resistance to deformation of the branches ensures the stability of the continuous feeding.
• Intelligent adjustable roller pressure gap, suitable for all kinds of raw materials with diameter ≤ 350mm.

Multi-blade dynamic cutting

• The core knife drum integrates high-strength alloy flying knife set, rotating at a high speed of 960 rpm.
• The blade adopts radial spiral layout, which adheres to the raw material surface during the whole cutting process.
• Low resistance layered slicing is achieved, significantly reducing chip rates and extending tool life.

Cyclone sorting output

• The cut wood chips penetrate through the holes of the knife drum screen and are transported directionally by the high-speed negative pressure airflow generated by the knife impeller.
• The built-in grading screen automatically separates the oversized chips, and the qualified chips are cleanly output through the closed air duct.
• The impurities are returned to the crushing area for secondary processing to ensure that the finished piece diameter is accurate and up to standard (±1mm error).

يمكن سحق ماكينات تقطيع الخشب إلى رقائق خشب عن طريق إضافة كسارة المطرقة الخشبية في الجزء الخلفي من الماكينة، ومن ثم يستخدم لصنع الفحم والعمليات الأخرى.

المنتج النهائي الذي يمكنك الحصول عليه

The finished product produced by this drum wood chipper has uniform particle size, fine texture, and smooth surface, which can be widely used in woodworking, paper making, and other fields.

المعلمات طبل منشرة الخشب

نموذج	SL215	SL216	SL218	SL2113
حجم المواد الخام (مم)	160*400	230*500	300*680	450*700
رقم السكين (قطعة)	2	2	2	2
سرعة دوران السكين (دورة في الدقيقة)	592	590	650	500
قطر المواد الخام (مم)	160	230	300	450
حجم رقاقة الخشب (مم)	30	30	30	38
القدرة (ر)	3-4	7-8	12-15	15-30
قوة المحرك الرئيسي (كيلوواط)	45	55	110	200-250
قوة محرك أسطوانة التغذية (كيلوواط)	2.2-3	3-4	4-5	7.5*2
قوة محرك مضخة الزيت (كيلوواط)	1.5*1	1.5*1	1.5*1	3*1
وزن الماكينة (كجم)	3590	5030	7000	11840
حجم الماكينة (مم)	1470*1550*970	1800*1900*1210	2200*2150*1500	3670*2517*2050
قوة المحرك الناقل (كيلوواط)	3	3	3	3

شكرا لقرائتكم خبر عن ماكينة تقطيع الأخشاب إذا كنت مهتمًا بآلاتنا أو لديك أي أسئلة، فلا تتردد في الاتصال بنا. يمكنك إخبارنا بالمتطلبات المحددة قبل طلب آلة تقطيع الأخشاب. لحماية مصالح عملائنا، سوف نختار الآلة الأكثر ملاءمة لك. جميع العملاء المهتمين بآلاتنا مدعوون أيضًا لزيارة مصنعنا. ونحن نتطلع إلى إقامة علاقة تعاونية معكم.