In the charcoal machine, rod making machine is a necessary equipment, which is mainly used to make materials into fuel rods, so how should we use the rod making machine to maintain?

How to maintain the bar making machine?

    1. Clean up the dust shot down on the equipment of the rod making machine, and pay attention to dust removal in the process of demolition. In the demolition inspection, dust should be forbidden to intrude into the moving parts.
    2. Open the internal cleaning inspection, and check the wear and tear of bearing, screw, triangle liner, nozzle and other components, replace bearing grease.
    3. remove the bearing cover of the roller shaft and check the wear condition of the bearing.
    4. remove the visual cover of the reducer to check the wear and the gear position of the gear.
    5. check the foundation bolts and release and tighten the safety bolts.
棒材生产机器2

The use and inspection of lubricants for bar making machines:

  1. 开放齿轮箱中的齿轮油应浸入齿轮超过60毫米。
  2. 滚轴轴承每三个月更换一次润滑脂或润滑枪。
  3. 使用齿轮油的减速器，注入60mm的齿轮中，可以有效进行日常维护，延长设备的使用寿命，减少因停车造成的停机时间，有效确保设备工作的连续性。

Above is Shuliy machinery for the majority of users to analyze the selection of the use of rod machine to choose according to their own needs, while doing a good job in the maintenance of rod machine, so as to ensure that the rod machine can be smoothly made, and ensure the service life of equipment.