The heat source of the continuous carbonization furnace is derived from the gasifier. The charcoal briquette production line is equipped with a gasifier. We can use our own gas supply furnace.
first. When the continuous carbonization furnace starts to start heating, a heat source heating carbonization furnace is needed.
1 En är att använda en het gasström som genereras av en reverberatorugn för att utföra en förbränningskolsyreförbränningsugn för att uppnå syftet med temperaturhöjning.
2 Nyingine ni kutumia kifaa cha gasifier kuwasha sawdust kupitia gasifier, na gesi inayoweza kuwaka inayozalishwa na gasifier kuchoma tanuru ya kaboni ili kufikia lengo la kuongezeka kwa joto. (Sawdust iliyogasiwa inapita kupitia kifaa cha kutoa poda ya kaboni cha tanuru ya kaboni ili kuwa poda ya kaboni iliyokaribishwa, na gesi inayoweza kuwaka inarejeshwa na kifaa cha kurejesha tar ya mti).
Second. When the carbonization furnace is heated to a certain temperature, the combustible gas generated inside is separated by a dust separator, and the combustible gas after the dust separation is recovered by the wood tar recovery device (generally, one ton of carbon powder can be obtained per ton of carbon powder produced) 200kg-300kg wood tar).
Third. After the carbonization furnace heats the self-produced gas, the reverberatory furnace heating or the gasifier gas production device stops working at this time, and the preliminary heating equipment is finished.
Fourth. After the carbonization furnace is working for 2-3 hours (different time and temperature), the toner flows into the condenser from the furnace and flows out from the condenser. The equipment is produced normally and can be continuously cut without interruption. Therefore, this carbonization furnace is called a continuous carbonization furnace.