The wood hammer mill crusher can pulverize many kinds of raw materials such as tree branches, waste wood boards, corn cobs, straw and so on into sawdust shape. Through the modular screen design (sieve hole 20-120 mesh adjustable), the raw material can be converted into 0.2-3mm high uniformity wood chips (integrity rate>95%) at one time.
The equipment has low investment cost, low energy consumption, high output and convenient use and maintenance. It is an important auxiliary equipment for the production of edible fungus planting, wood chip board, high density board and biomass pellet, etc. It is favored by users in agriculture and renewable resources processing industry.
Aplicaciones de la máquina para fabricar aserrín de madera.
- Crushing wood, branches and trimmings to make sawdust for board making or granulation.
- Crushing corn cobs, straw, pasture and other crop residues, used as livestock feed or land fertilizer.
- Process waste paper to produce recycled paper, realizing environmental reuse.
- Crushed raw materials can be further made into charcoal or biomass fuel.
- It can be used as pre-treatment equipment for raw material volume reduction, easy transportation or sale.
Hammer crusher structure and working principle
Estructura: The wood hammer mill crusher is currently the most widely used type of mill, with a relatively high volume of electrical products and good versatility. Its structure consists of three parts: feed inlet, crushing chamber (rotor, hammer, screen, tooth plate), and discharge part (fan, collecting drum, cyclone, and dust collecting bag).
Principio: Esta trituradora de martillos para madera se basa principalmente en el impacto para triturar materiales cuando funciona.
- En el proceso de trituración, el material ingresa a la trituradora y es impactado por el martillo giratorio de alta velocidad para romperse.
- El material triturado obtiene energía cinética del martillo y golpea la criba a gran velocidad.
- Al mismo tiempo, los materiales chocarán rápidamente entre sí y se romperán en muchos lugares.
Cuando el material golpea la criba, el material más pequeño que el diámetro de la malla se descarga, y el material más grande continuará siendo impactado por el martillo, molido, exprimido y roto hasta que cumpla con los requisitos y se descargue.
Materias primas de la trituradora de molino de martillos de madera.
The hammer crusher machine is suitable for processing a variety of soft and small-sized raw materials, including coconut shells, chipboards, wood pallets, wood shavings, twigs, tree strips, corn stalks, thin wood panels, and medicinal herbs.
Tamices a máquina y aserrín preparado que puedes conseguir.
Depending on the fineness and size of the finished product, we can equip sieves with different aperture sizes and also accept customized orders.
Wood shredder machine core advantages
- Wide range of applications: it can pulverize many kinds of soft and small-sized materials.
- Simple structure: reasonable design, compact structure, easy to operate and maintain.
- High crushing efficiency: one-time molding, large output, suitable for large-scale production.
- Low energy consumption: relatively low operating energy consumption, saving production costs.
- Adjustable discharge size: the screen can be replaced, according to the need to control the size of the finished product.
- Good economic efficiency: small investment, quick return, suitable for small and medium-sized processing plants.
Parámetros de la rectificadora de martillos.
| Modelo | WD-60 | WD-70 | WD-80 | WD-90 | WD-1000 | WD-1300 |
| Potencia (kilovatios) | 22 | 30 | 37 | 55 | 75 | 90 |
| Martillos (uds.) | 30 | 40 | 50 | 50 | 105 | 105 |
| Ventilador (kilovatios) | 7.5 | 7.5 | 11 | 22 | ||
| Removedor de polvo (piezas) | 5 | 5 | 5 | 5 | 14 | 14 |
| Diámetro del ciclón (M) | 1 | 1 | 1 | 1 | 1 | 1 |
| Capacidad (T/h) | 0.8-1 | 1-1.5 | 1.5-2 | 2-3 | 3-4 | 4-5 |
Successful case of hammer miller shredder
- A customer from Southeast Asia originally owned a large-scale paper mill, and suffered from the inability to deal with a large amount of waste paper.
- By watching our YouTube video, he learned about the operating effect of the wood hammer mill and the working condition of the whole production line, and finally decided to purchase the model 1000 wood hammer mill crusher production line.
- After put into use, the customer saves more than 100 tons of paper-making raw materials per month by crushing waste paper, not only reduces the cost, but also develops new products of renewable paper, which is welcomed by the local market and creates considerable profits.
Consejos sobre la trituradora de martillos para madera
- Check before starting the machine: make sure that all parts are intact, the pins are not off, the bolts are not loose, the speed is reasonable, the lubrication parts have oil, and the rotating parts are not stuck.
- Remove foreign matter: the raw materials should not contain metal, sand and gravel and other debris, in order to prevent damage to machine parts.
- Operation norms: the operator should stand on the side of the feeding port, it is forbidden to put the hand into the machine, and the cover should not be opened during the running process.
- No-load start: make sure the wood hammer mill crusher machine steering is correct before starting, idle running for 2-3 minutes, and make sure the operation is smooth before feeding the materials evenly.
- Uniform feeding: no load start; if there is a powder spraying phenomenon, you can accelerate the feeding speed, and add water appropriately, but avoid overloading the motor.
- The feeding port is blocked: it is forbidden to feed the material forcibly by hand, wooden stick or iron bar.
- Regular maintenance: after running for about 500 hours, the bearings should be cleaned and the lubricating oil should be replaced in time.
- Abnormal handling: if there is any abnormal sound during operation, it should be stopped immediately for inspection and troubleshooting.
- Hammer head replacement: the hammer head can be switched direction or replaced with a new hammer head after wear.
- Shutdown operation: idle for 2-3 minutes before shutdown, close the feed regulator and remove the remaining materials in the machine.
No dude en contactarnos en cualquier momento
También tenemos trituradoras más grandes disponibles para proyectos de trituración al aire libre más grandes, como tablas de paletas de madera grandes, trituración de troncos y más. (Artículo relacionado: Trituradora Integral | Equipo de trituración multifuncional.)
Si tiene alguna pregunta o necesita más información, no dude en contactarnos y estaremos encantados de brindarle información detallada. Además, le damos una calurosa bienvenida a visitar nuestra fábrica para experimentar nuestro avanzado proceso de producción y el rendimiento de la máquina. La comunicación cara a cara con nosotros es la forma más directa de entender nuestros productos. ¡Esperamos establecer una cooperación con usted!