The production of mechanism charcoal is a complicated process. After a series of chemical reactions in the furnace body, the finished charcoal is obtained. The charcoal briquettes produced by Shuliy Machinery have high activity, easy to burn, no exhaust after combustion or Waste smoke is generated, the heat generated by combustion is high, and the heat energy is converted high, which is the best in environmental protection and performance. The charcoal briquette production line has such a magical effect. What is his working principle?
The formation of charcoal can be completed in three stages – the initial stage of drying, carbonization, and deep carbonization. The raw materials in the three stages have different changes and reflections, and the substances produced are also different. In the charcoal briquette production line, a large amount of flue gas is generated in the process of carbonizing raw materials. If these flue gases are not directly discharged into the atmosphere, they will pollute the atmosphere. At the same time, the flue gas can be recovered as a heat source in the carbonization stage. Shuliy’s charcoal briquette production line adopts self-sufficient working mode, automatic recovery of flue gas supply in the carbonization process to the bottom combustion, complete green production process, and no pollution discharge, fully comply with environmental protection requirements; automatic temperature control system is installed in the equipment, control The most suitable carbonization temperature guarantees the quality of the finished carbon.
成品碳的使用非常广泛。许多客户关心成品的价格。对于碳的制造商，他们可以观察市场并对自己的投资做出判断。木炭的价格并不是固定的，它会随着市场条件的变化而变化，木炭也分为三等或六等等，质量相对较高，而劣质木炭或生产失败的木炭价格较低。