The function of the heating ring of the machine-made charcoal machine is to harden the surface of the formed machine-made charcoal rod. After hardening, the yield and quality of the machine-made charcoal can be increased. This will increase the production efficiency of the machine-made charcoal machine production line. The machine-made charcoal machine production line adopts three heating rings to meet the production demand. This method is adopted. It can make the surface of the machine charcoal harden once, and then improve the production efficiency and quality of the machine charcoal. When this problem occurs, it is usually due to the heating temperature is too high or not up to the standard, or it may be caused by different factors such as the wear of the forming sleeve is too serious, and the excessive moisture in raw materials. We need to find out the reasons and compare them one by one, and make corresponding adjustments. Heating ring replacement method:
Confirme que el tipo de anillo calefactor sea el mismo; al instalar el anillo calefactor, la salida debe calentarse de manera uniforme, lo que puede prolongar la vida útil del anillo calefactor y mejorar la eficiencia de conversión de la lignina.
Después de instalar el anillo calefactor, la sonda debe colocarse en la posición fija del barril para asegurar el control preciso de la temperatura del barril por el termómetro.