In the charcoal machine, rod making machine is a necessary equipment, which is mainly used to make materials into fuel rods, so how should we use the rod making machine to maintain?

How to maintain the bar making machine?

    1. Clean up the dust shot down on the equipment of the rod making machine, and pay attention to dust removal in the process of demolition. In the demolition inspection, dust should be forbidden to intrude into the moving parts.
    2. Open the internal cleaning inspection, and check the wear and tear of bearing, screw, triangle liner, nozzle and other components, replace bearing grease.
    3. remove the bearing cover of the roller shaft and check the wear condition of the bearing.
    4. remove the visual cover of the reducer to check the wear and the gear position of the gear.
    5. check the foundation bolts and release and tighten the safety bolts.
Máquina de hacer barras2

The use and inspection of lubricants for bar making machines:

  1. el aceite para engranajes en la caja de engranajes abierta debe invadir el engranaje más de 60 milímetros.
  2. los rodamientos del eje de rodillo se cambian cada tres meses para reemplazar la grasa o las pistolas de grasa.
  3. El reductor con aceite de engranaje, inyección en el engranaje de 60 mm, puede realizar un mantenimiento diario de manera efectiva y prolongar la vida útil del equipo, puede reducir el tiempo de inactividad causado por el estacionamiento, y puede garantizar de manera efectiva la continuidad del trabajo del equipo.

Above is Shuliy machinery for the majority of users to analyze the selection of the use of rod machine to choose according to their own needs, while doing a good job in the maintenance of rod machine, so as to ensure that the rod machine can be smoothly made, and ensure the service life of equipment.